As an important part of the forklift truck hydraulic system, the normal operation of the forklift hydraulic hose system is crucial to the safe operation of the forklift. So, how to replace and repair the forklift hydraulic hose system, please see the following methods:
1. Before dismantling, please note keep the work environment clean and avoid getting in place. When disconnecting the forklift hydraulic hose, cover the surrounding area with a rag to avoid oil contamination of other parts. Do not allow foreign objects to enter when connecting the catheter.
2. The forklift wraps the sealing tape on the tapered thread, and the fragments of the sealing tape are not allowed to enter the forklift hydraulic hose. Use O-rings in the joints when connecting each hydraulic component, install a guide on the joint threads before installation and then insert the O-rings along the way to avoid damage to the O-rings. Tighten the joint by hand, and then tighten the lock nut to the specified torque after determining the position of the joint.
3. Release the hydraulic oil before disassembling the forklift hydraulic hose.
4. Check whether the forklift hydraulic hose is leaking, aging or damaged. The hose should be replaced. Leaky or damaged connections should be replaced.
5. Conduit, it is necessary to check whether the forklift hydraulic hose is leaking, bent, broken or scratched before disassembly. The conduit should be notified to the storage electric forklift maintenance company to replace it. Leaky or damaged connections should be replaced.
The above is about the disassembly method of the hydraulic pipeline system in the forklift maintenance, I hope it will be helpful to everyone.
