1. Accurate loading and unloading fork
In the operation of the forklift, the fork should be able to put in and out of the cargo accurately. If the fork is not correct, it may break the cargo, or even knock the cargo down. Even if the above consequences are not caused, it is necessary to reverse at least, adjust the height, direction and inclination of the fork and then fork again, thus extending the operation time. When stacking goods with forklifts, try to stack them successfully at one time and avoid multiple adjustments. Especially in the container, to master the various goods in the container stacking method, not blindly disorderly, repeatedly moved. When the forklift truck finishes loading and unloading operations, it is very frequent to enter and exit the garage door and reverse a lot. The steering should be accurate, and the garage door should not be scratched or reversed frequently. This is very beneficial to the safety production and the improvement of operation efficiency.
2. Steady start and stop
Forklifts are required to start or stop without impact, and to move without jolting. In the beginning to achieve stability, should master the clutch pedal and pedal acceleration between the cooperation, strictly according to the starting essentials to do; In the parking place, according to the speed of the car, the appropriate use of brake, especially in the forklift will stop, the appropriate release of the pedal, and then apply pressure, can stop smoothly; In driving, according to the road conditions, timely correction of the direction, to hit less, less back, not tortuous snake; Driving on uneven roads is slow
3. Complete the loading and unloading task in the shortest time
Speed should be based on safety, accuracy and stability. After the forklift starts, it accelerates quickly and runs at full speed. During the running, it observes the position of the goods to be forked and the height of the stack, and adjusts the height and inclination of the fork when the forklift slows down and slides, and then it can be forked when it reaches the destination.
4. Ensure the safe operation of the forklift
When using the forklift truck, the driver should know the performance of the forklift truck. Timely overhaul according to maintenance regulations to ensure the forklift works reliably in good condition; Strict implementation of rules and regulations, have the ability to foresee accidents; Can be flexible to take measures to prevent the occurrence of accidents.
5. Use the forklift reasonably
The driver shall, on the basis of mastering the performance of the forklift, operate the forklift correctly according to the specific conditions of loading and unloading operations
