
1. Function, the work of the forklift fuel pump is mainly to suck the gasoline out of the fuel tank, make it have a certain pressure, and pump it into the float chamber of the carburetor through the pipeline and the fuel filter. At present, gasoline engines widely use mechanically driven diaphragm forklift fuel pump. Mounted on one side of the engine and driven by an eccentric on the camshaft of the valve train.
2. Working principle, when the oil is sucked, the camshaft rotates, the eccentric wheel pushes the rocker arm, the pull rod pulls down the push rod through the hook, the compression spring makes the pump membrane drop, the volume of the oil chamber increases, the pressure drops to the bottom, and the intake valve is sucked open, When the fuel outlet valve is closed, gasoline enters the fuel chamber from the fuel inlet. When the oil is delivered, the eccentric wheel rotates over the highest point, the slope of the rocker arm has no effect on the slope of the outer end of the ejector hook, the forklift fuel pump membrane is pushed upward under the tension of the spring, the volume of the oil chamber is reduced, the oil pressure is increased, and the oil inlet valve is closed. When the oil outlet valve is opened, gasoline is fed into the carburetor float chamber from the valve through the oil outlet.













