Daily maintenance instructions of Heli lift truck
Here we introduce the maintenance of Heli forklift truck. In order for Heli forklift truck to work normally and reliably, regular maintenance measures are required. Strict implementation of forklift maintenance requirements can extend the service life of forklifts and ensure the safety of operations.
The maintenance cycle of Heli forklift truck is as follows:
1. Daily maintenance, after each shift.
2. Level 1 technical maintenance. After a total of 100 hours of work, one shift is equivalent to 2 weeks.
3. Secondary technical maintenance. After 500 hours of accumulated work, one shift is equivalent to one quarter
First of all, we must strictly implement the daily maintenance requirements of Heli forklifts:
1. Clean the dirt, soil and dirt on the forklift, the key parts are: fork frame and mast slide, generator and starter, battery electrode fork column, water tank, air filter.
2. Check the tightness of each part, focusing on: fork frame support, lifting chain tightening screws, wheel screws, wheel fixing pins, brakes, and steering gear screws.
3. Check the reliability and flexibility of the steering gear.
4. Check for leakage, focusing on: various pipe joints, diesel tank, engine oil tank, brake pump, lift cylinder, tilt cylinder, water tank, water pump, engine oil pan, torque converter, transmission, drive axle, main reduction gear , Hydraulic steering gear, steering cylinder.
5. Check the tire pressure: if it is insufficient, it should be added to the specified value to confirm that there is no air leakage. Check whether the tire contact surface and sides are damaged, and whether the rim is deformed.
6. Check the brake fluid and water volume: check whether the brake fluid is within the scale range, and check whether air is mixed in the brake pipeline. When adding brake fluid, prevent dust and water from mixing. When adding water to the water tank, use clean tap water. If antifreeze is used, the same antifreeze should be added. When the water temperature is higher than 70℃, do not open the water tank cover. When opening the cover, put a thin cloth on it and do not twist the water tank cover with gloves. Hebei Dilong forklift.
7. Engine oil quantity, hydraulic oil, electrolyte check: first pull out the oil dipstick, clean the dipstick, insert it and pull it out to check whether the oil level is between the two scale lines. The oil level in the working oil tank should be between the two scale lines; if there is too little oil, air will be mixed in the pipeline, and too much will overflow from the cover. The battery electrolyte should also be between the upper and lower scale lines. If it is insufficient, add distilled water to the top line.
8. Brake pedal, micro-motion pedal, clutch pedal, hand brake inspection: step on each pedal to check whether there is abnormal dullness or jamming. The force of the hand brake handle should be less than 300N to confirm that the hand brake is safe and reliable.
9. Inspection of belts, horns, lights, meters, etc.: Check whether the belt tightness meets the regulations, there is no adjustment margin or damaged or cracked, which must be replaced; the horns, lights, and meters should be normal and effective.
10. Remove the sediment from the oil filter.
In this article, Anhui Leading Forklift Parts Company introduced the daily maintenance of Heli forklifts. In addition to daily maintenance, the maintenance manual of Heli lift truck also stipulates that the technical maintenance of the forklift must be performed. The technical maintenance is divided into two levels. In the next article, we will introduce the first-level technical maintenance of the forklift. As Heli lift truck have many model such as Heli H2000 series 25, H2000 series30, G series, K series, please conform your maintenance planning with local Heli agent.
