Forklift Brake Master Cylinder | Lift Truck Brake Parts Supplier | All Brand Forklift Parts Distributor
Part Name: Forklift Brake Master Cylinder
Application: Brake Master Cylinder for Hyundai / TCM / Tailift / ATF Forklifts
Products Photos
Products Parameters
|
Part Number |
Application |
|
30CJA53-40000 |
Hyundai Forklift 2-3T |
|
239A5-40101 |
ATFFG20-30C6/T6 Forklift |
|
281E5-42101 |
Nichiyu / TCM / ATF Forklift Trucks |
|
92512651G |
Tailift Forklift Truck 1-3.5T |
|
Q64G3-70221 |
Reach Truck Forklift 1-2T |
|
ZDZB-TLF4.5 |
Tailift Forklift 4.5T |
Products Description
How to Bleed Air from a New Forklift Brake Master Cylinder
When replacing the forklift brake master cylinder, it's essential to remove any air trapped in the system. Since brake fluid is incompressible, the presence of air can lead to reduced braking performance, which may result in accidents. Properly bleeding the system ensures safe and effective braking.
Wondering about the correct order for bleeding air after replacing the master cylinder? Start with the right front wheel, then move to the left front wheel, and finally address the clutch master cylinder if applicable. Follow these steps to ensure thorough air removal:
Step-by-Step
Guide to Bleed a Forklift Brake System
Park the Forklift on a Level Surface
Ensure the parking brake is engaged.
Locate the Bleed Screws
These are typically located at the highest point of each brake caliper.
Fill the Master Cylinder
Add fresh brake fluid to the master cylinder, keeping it topped up throughout the bleeding process.
Open the Bleed Screw
Have your helper slowly pump the brake pedal several times and then hold it down. Quickly open the bleed screw on one of the calipers.
Collect the Fluid
As you open the bleed screw, brake fluid containing air bubbles will flow out. Collect this fluid in a clean container.
Tighten the Bleed Screw
Once a steady stream of clean fluid emerges, quickly tighten the bleed screw.
Repeat the Process
Repeat steps 4, 5, and 6 for each wheel, following the recommended sequence (usually starting with the farthest wheel from the master cylinder).
Check Fluid Level
After bleeding all the brakes, check the fluid level in the master cylinder and top it up if necessary.
As the largest distributor of forklift parts in China, we offer a complete range of high-quality brake components, including brake master cylinders for nearly all Chinese forklift brands. Our commitment to quality and competitive pricing makes us the go-to supplier for all your forklift brake parts needs.
In summary, properly bleeding air from a new forklift brake master cylinder is vital for optimal braking performance. Follow the outlined steps to ensure safety and efficiency in your operations. Trust us for all your forklift parts and accessories to keep your equipment running smoothly!
YouTube Videos
Hot Tags: forklift brake master cylinder | lift truck brake parts supplier | all brand forklift parts distributor, China, manufacturers, suppliers, factory, HELI forklift, CHL forklift, JAC forklift, Hangcha forklift, forklift HELI 3 ton, HELI forklift for sale, Hangcha forklift mast rollers, continental forklift tires, tcm fd30, Lift Truck Wheel Brake Cylinder, Glow Plug Timer, diesel forklift pre clean air filter
You Might Also Like
Send Inquiry