Zh1130 S195 S1100 Cylinder Head Gasket for Diesel Engine

We will design and develop the most cost-effective Cylinder Head Gasket, Tire, fork extensions near me for you at your acceptable cost. Through the two-wheel drive model of technology plus market, our company has formed a good cycle mechanism of market and R&D promoting each other and transforming each other. We believe that high-quality products are the solid foundation of the brand.

Product Title: Cylinder Head Gasket

Product Model: C240F5-11141-069-0

 

 

 

 

 

 

Item	Description
Product Name	Cylinder Head Gasket
P/N	C240F5-11141-069-0
Applied Model	C240PKG / J
Net Weight (kg)	0.50
Gross Weight (kg)	1.50
Qty per Carton	1
Carton Size (kg)	47*21*03

 

 

 

 

Forklift Diesel Engine Cylinder Head Gasket Product Description:

It is applied to the C240 Isuzu diesel engine and adopts metal steel surface technology, and the cutting surface is neat and flawless. Forklift engine cylinder head gasket has the advantages of heat resistance, corrosion resistance, sufficient strength, certain elasticity, and thermal conductivity.

 

Forklift Engine Cylinder Gasket Disassembly and Maintenance Caution:

1. Removing the cylinder head bolts and replacing the cylinder pads must be performed after the engine has completely cooled down to prevent the cylinder head from flexing and deforming.

2. Check the surface of the cylinder head gasket for depressions, protrusions, damage, etc .; check whether the flatness of the cylinder head and cylinder body meets the requirements, and then clean the cylinder gasket, cylinder head, and cylinder body, and blow dry with high-pressure air to avoid the influence of dirt seal.

3. The selected cylinder gasket must be a genuine quality accessory that meets the requirements (specifications and models). Pay attention to the up and down orientation marks to prevent reverse installation and avoid human failure. Please contact the leading forklift parts for original accessories.

4. Tighten the cylinder head bolts in accordance with the technical specifications. Since the center is symmetrically extended to the two ends and crosswise, it is tightened to the specified torque in 2 to 4 times; it is more reliable to fasten it once in the hot car state.

5. Should engine cylinder head bolts not be removed by rusting, you do not pry hard with iron to avoid damaging the cylinder head. You can inject kerosene into the screw holes of the cylinder head for a while to remove it.

6. If the cylinder head is improperly stored, disassembled, or disassembled, and the cylinder gasket is damaged or deformed, the cleaning during installation will result in poor work and tight sealing, which may cause human failure and must be taken seriously.

 

 

Our company adheres to the enterprise tenet of survival by quality and development by reputation and constantly develops Zh1130 S195 S1100 Cylinder Head Gasket for Diesel Engine of different grades and prices to meet the needs of buyers at different levels. As an experienced group we also accept customized orders. We have formed a strong production and design and development capability to ensure product quality, precision and stability.