Vsm Fd50 Cpcd50 5ton 5000kg Diesel Forklift Truck, with 3m Lifting Height, with Isuzu Engine

We have a one-to-one after-sales service system, and we can put the future trending technology of Heli mast roller bearings, heli pallet jack, Forklift Differential industry for free coaching. We are making efforts to develop new products that cater to the market, open market channels, and occupy market shares. We only apply high-quality materials and advanced formulas, which are becoming more and more perfect with the changes in market demand. We have successfully localized the technology on the basis of absorbing global technological achievements. We are dedicated to see the future trends, thus we can act accordingly.

Product Title: Cylinder Head Gasket

Product Model: C240F5-11141-069-0

 

 

 

 

 

 

Item	Description
Product Name	Cylinder Head Gasket
P/N	C240F5-11141-069-0
Applied Model	C240PKG / J
Net Weight (kg)	0.50
Gross Weight (kg)	1.50
Qty per Carton	1
Carton Size (kg)	47*21*03

 

 

 

 

Forklift Diesel Engine Cylinder Head Gasket Product Description:

It is applied to the C240 Isuzu diesel engine and adopts metal steel surface technology, and the cutting surface is neat and flawless. Forklift engine cylinder head gasket has the advantages of heat resistance, corrosion resistance, sufficient strength, certain elasticity, and thermal conductivity.

 

Forklift Engine Cylinder Gasket Disassembly and Maintenance Caution:

1. Removing the cylinder head bolts and replacing the cylinder pads must be performed after the engine has completely cooled down to prevent the cylinder head from flexing and deforming.

2. Check the surface of the cylinder head gasket for depressions, protrusions, damage, etc .; check whether the flatness of the cylinder head and cylinder body meets the requirements, and then clean the cylinder gasket, cylinder head, and cylinder body, and blow dry with high-pressure air to avoid the influence of dirt seal.

3. The selected cylinder gasket must be a genuine quality accessory that meets the requirements (specifications and models). Pay attention to the up and down orientation marks to prevent reverse installation and avoid human failure. Please contact the leading forklift parts for original accessories.

4. Tighten the cylinder head bolts in accordance with the technical specifications. Since the center is symmetrically extended to the two ends and crosswise, it is tightened to the specified torque in 2 to 4 times; it is more reliable to fasten it once in the hot car state.

5. Should engine cylinder head bolts not be removed by rusting, you do not pry hard with iron to avoid damaging the cylinder head. You can inject kerosene into the screw holes of the cylinder head for a while to remove it.

6. If the cylinder head is improperly stored, disassembled, or disassembled, and the cylinder gasket is damaged or deformed, the cleaning during installation will result in poor work and tight sealing, which may cause human failure and must be taken seriously.

 

 

The company values the concept of making accurate and high-quality Vsm Fd50 Cpcd50 5ton 5000kg Diesel Forklift Truck, with 3m Lifting Height, with Isuzu Engine. We use our technical and marketing advantages to continuously absorb modern scientific and technological achievements, and strive to improve production for customers. Our company adheres to the principle of high quality and win-win service, strictly controls the quality of products and provide high standard service.