Vsm 1.5 Ton Single Fuel LPG Forklift with Wide-View 3 Meter Duplex Mast and Nissan K21

Our company is an pallet truck 2 tons electric, cpcd25 parts, Forklift Wiper Blades enterprise integrating research, product development, production and online and offline integrated marketing, and has gradually formed an integrated industrial chain of research, learning, and sales. Since the establishment of our company, with the care and support of colleagues and customers from all walks of life, we have been constantly striving for progress and have developed into a comprehensive enterprise. Welcome new and old customers to negotiate and cooperate with us, let us cooperate for a win-win situation. We spare no effort to build an open innovation ecosystem and jointly develop future-oriented innovation to achieve a win-win situation for all parties. We continuously improve our integrated management policy to meet changing customer needs. We will start from the needs of domestic customers and strive to develop high-quality products that meet customer requirements.

Product Title: forklift hydraulic transmission housing case for Heli

Product Model: Forklift hydraulic transmission case BSX-120M3-82011-LXLS

Maintenance method of Heli forklift hydraulic transmission:

1. First, lift out the forklift engine with a crane, first take out the torque converter, and then take out the entire forklift gearbox.

2. Before disassembling the transmission box, fill in the forklift transmission oil first, and then start to remove the upper cover of the Heli forklift transmission, take out the forklift oil supply pump and check for damage.

3. Remove the front and rear clutch assembly of the transmission box and check for damage and wear. If it needs to be replaced, it must be replaced with a new one. Check and clean again, and then install the gearbox in order, and then install it on the forklift.

Maintenance methods of main parts of Heli forklift hydraulic gearbox:

1 Torque converter fault part of Heli forklift

l The engine speed of the forklift drops, the solution is to increase the engine speed;

l If there are bubbles in the oil, directly check the pipeline tightness and whether the forklift hydraulic oil has deteriorated;

l The oil temperature rise is too high or too low.

2 Transmission part of Heli forklift

l The friction plate is stuck or worn, check whether there is glue on the friction plate of the forklift, uneven contact, and warping;

l The seal ring or O-ring of the forklift is worn out. Check whether the seal ring and groove width are worn out or damaged.

3 The oil temperature of the Heli forklift hydraulic transmission box is too high

l The torque converter has been working in the low speed ratio area for a long time, the efficiency of the torque converter is very low, or it has been in the stall state for too long, this kind of working condition should be changed and the above working conditions should be avoided.

l When the speed ratio is high, the one-way clutch is stuck and loses control. It should be checked and eliminated.

l The oil volume is too small, or air bubbles are generated in the system, the oil volume should be increased to adjust the discharge valve pressure.

l If the quality of the oil is unqualified, replace with new oil.

4 Transmission part of Heli forklift

l Clutch obstacle, check whether the friction plate is slipping;

l If the bearing is damaged, check whether the mating surface is damaged.

5 Heli forklift gearbox does not work

l Check whether the control valve has spring stuck or broken;

l Check whether the main oil pressure is normal, and if it is abnormal, check whether the triple pump is excessively worn or damaged;

l If the main oil pressure is normal, check the clutch oil pressure. If it is abnormal, check whether the seal ring or O-ring is worn or damaged. Check whether the clutch and clutch piston ring are damaged;

l Check whether the oil pressure of the torque converter is normal. If not, check the torque converter.

We are committed to providing customers with all-round and precise services to meet their various needs. We provide a variety of products based on many years of experience in the production of Vsm 1.5 Ton Single Fuel LPG Forklift with Wide-View 3 Meter Duplex Mast and Nissan K21. We use years of experience to make our products to be more creative and unique so that our products have both appearance and quality assurance. Our company adheres to the enterprise tenet of 'commitment and service coexist, benefit and reputation coexist'.