Steering Knuckle

Our company constantly improves the production process, accurately controls the product manufacturing process, and produces multi specification and high-quality cpcd30 forklift cylinder, Forklift Direction Switch, Xinchai engine NB485. We use our technical and marketing advantages to continuously absorb modern scientific and technological achievements, and strive to improve production for customers. We cultivate employees' awareness of energy conservation, emission reduction and environmental protection, and make contributions to environmental protection. We advocate green office and low-carbon life, carry out green public welfare undertakings, create a good atmosphere, and jointly protect the environment. We always adhere to the "craftsman spirit! Customer-centric! Create perfect value!" As the goal of sustainable business operation, we strive to maximize the satisfaction of customers' needs.

Product Title: Forklift Steering Knuckle (Left)

Product Model: TLF-42504217 for Tailift CPCD30 Forklift

 

 

 

 

 

 

 

 

Item	Description
Product Name	Forklift Steering Knuckle (Left)
P/N	TLF-42504217
Applied Model	Tailift Forklift CPCD30
Net Weight (kg)	4.4
Gross Weight (kg)	4.7
Qty per Carton	1
Carton Size (cm)	14*10*20

 

 

 

Lift Truck Steer Knuckle

The function of lift truck steer knuckle is to transmit and bear the front load of the forklift, support and drive the front wheel to rotate around the kingpin, so that the forklift is steered, and it is subject to variable impact loads when the forklift is running, so it is required to have high strength.

 

Lift Truck Steer Knuckle Should Be Inspected When Maintenance

1. Inspection of knuckle journal locking threads. No more than 2 teeth were injured. The lock nut can only be screwed in with a wrench. If it can be screwed in by hand, it means that the middle diameter of the thread is worn and loose, and the steering knuckle should be repaired or replaced.

 

2. Inspection of taper holes on knuckles. The wear of the taper hole matched with the knuckle arm and other rods should be checked with a plug gauge. The contact area should not be less than 70%, and the thrust end face of the taper neck matched with the taper hole should not be less than 2mm. Otherwise, replace the knuckle.

 

 

 

We take 'Integrity Enterprise, Professional Technology, Technological Innovation' as the development idea, and strive to contribute more to the Steering Knuckle industry. Our company adheres to the development strategy of 'internationalization, technology and industrialization', and vigorously develops the institutional innovation, technological innovation and management innovation, and is highly praised by customers. We uphold high standards and continue to carry out management reforms, pursuing simultaneous improvement of efficiency and value.