Steering Knuckle Rh for Toyota 7f10/18 Forklift Truck

Our heli rough terrain forklift, Forklift Transmission Gearbox, Forklift Steering Axle Frame has been sold nationwide and exported to the world, enjoying a high reputation in the industry for its superior performance. Our company has a professional R&D team to customize different styles to match the requirements of each customer. We hope to contribute to the creation of a bright future of a flourishing building materials industry in the new century! We look at the changing market from the perspective of development, and pay attention to user experience while meeting the market demand. Our company takes the high technology as the starting point, increases the market share from time to time.

Product Title: Forklift Steering Knuckle (Left)

Product Model: TLF-42504217 for Tailift CPCD30 Forklift

 

 

 

 

 

 

 

 

Item	Description
Product Name	Forklift Steering Knuckle (Left)
P/N	TLF-42504217
Applied Model	Tailift Forklift CPCD30
Net Weight (kg)	4.4
Gross Weight (kg)	4.7
Qty per Carton	1
Carton Size (cm)	14*10*20

 

 

 

Lift Truck Steer Knuckle

The function of lift truck steer knuckle is to transmit and bear the front load of the forklift, support and drive the front wheel to rotate around the kingpin, so that the forklift is steered, and it is subject to variable impact loads when the forklift is running, so it is required to have high strength.

 

Lift Truck Steer Knuckle Should Be Inspected When Maintenance

1. Inspection of knuckle journal locking threads. No more than 2 teeth were injured. The lock nut can only be screwed in with a wrench. If it can be screwed in by hand, it means that the middle diameter of the thread is worn and loose, and the steering knuckle should be repaired or replaced.

 

2. Inspection of taper holes on knuckles. The wear of the taper hole matched with the knuckle arm and other rods should be checked with a plug gauge. The contact area should not be less than 70%, and the thrust end face of the taper neck matched with the taper hole should not be less than 2mm. Otherwise, replace the knuckle.

 

 

 

We pursue the administration tenet of 'Quality is exceptional, Assistance is supreme, Reputation is first', and will sincerely create and share success with all clients for Steering Knuckle Rh for Toyota 7f10/18 Forklift Truck. We ensure the consistency of our product production process and the stability of product quality. Relying on a variety of advanced equipment, we continuously improve product quality with systematization and modularization to ensure that the product is the best when customer received.