Steering Knuckle Rh for Toyota 7f/8f20 Forklift Truck

We absorb the management experience of large enterprises in our company management, implement total quality management, and establish a scientific quality assurance system to ensure the product quality of processed Forklift Maintenance, 650 x 10 forklift tire, 600x9 forklift tire. We have a strong sense of responsibility and dedication to persevere through the frustrations and stresses encountered in the workplace. We strive to build the company into an excellent company with leading technology and services in the industry. The company pays attention to technology research and development and scientific and humanistic management methods. It has complete sets of production equipment and mature industrial conditions and has established a strict finished product testing system. It has the ability to provide users with design and manufacturing services for products with special specifications. Our company has set up a new product R & D team to cooperate with relevant enterprises and research and development institutions at home and abroad, and is committed to the research and development of new products in combination with market demand, technological development and other conditions, and has made substantial progress and achievements.

Product Title: Forklift Steering Knuckle (Left)

Product Model: TLF-42504217 for Tailift CPCD30 Forklift

 

 

 

 

 

 

 

 

Item	Description
Product Name	Forklift Steering Knuckle (Left)
P/N	TLF-42504217
Applied Model	Tailift Forklift CPCD30
Net Weight (kg)	4.4
Gross Weight (kg)	4.7
Qty per Carton	1
Carton Size (cm)	14*10*20

 

 

 

Lift Truck Steer Knuckle

The function of lift truck steer knuckle is to transmit and bear the front load of the forklift, support and drive the front wheel to rotate around the kingpin, so that the forklift is steered, and it is subject to variable impact loads when the forklift is running, so it is required to have high strength.

 

Lift Truck Steer Knuckle Should Be Inspected When Maintenance

1. Inspection of knuckle journal locking threads. No more than 2 teeth were injured. The lock nut can only be screwed in with a wrench. If it can be screwed in by hand, it means that the middle diameter of the thread is worn and loose, and the steering knuckle should be repaired or replaced.

 

2. Inspection of taper holes on knuckles. The wear of the taper hole matched with the knuckle arm and other rods should be checked with a plug gauge. The contact area should not be less than 70%, and the thrust end face of the taper neck matched with the taper hole should not be less than 2mm. Otherwise, replace the knuckle.

 

 

 

Our company has established the 'customer-oriented, quality win' quality policy, the pursuit of first-class quality, first-class service to ensure high-quality Steering Knuckle Rh for Toyota 7f/8f20 Forklift Truck. We know that sustainable development has only a beginning and no end, and we always make it our goal to create sustainable value for society. We have profound technical strength, perfect management system, rigorous work attitude, attentive service team, and strive to be the winner of the industry.