Steering Knuckle Lh for Toyota 7f10/18 Forklift Truck

We always adhere to the principle of high quality and thoroughly inspect every detail to ensure the performance of our 6 00 x9 forklift tire, parts of forklift engine, Heli forklift air filter housing. With reliable quality, reasonable price, and good after-sales service, we have won the trust of new and old users. Since its launch on the market, it has quickly become an industry-leading brand and has been highly recognized by the market. We are constantly developing new technologies, new products and new fields, creating value and common development with our customers, and striving to create a first-class modern enterprise with advanced productivity and international competitiveness. We go all out to construct the company's future with perfect quality, and strive to build the company into a leader in the industry.

Product Title: Forklift Steering Knuckle (Left)

Product Model: TLF-42504217 for Tailift CPCD30 Forklift

 

 

 

 

 

 

 

 

Item	Description
Product Name	Forklift Steering Knuckle (Left)
P/N	TLF-42504217
Applied Model	Tailift Forklift CPCD30
Net Weight (kg)	4.4
Gross Weight (kg)	4.7
Qty per Carton	1
Carton Size (cm)	14*10*20

 

 

 

Lift Truck Steer Knuckle

The function of lift truck steer knuckle is to transmit and bear the front load of the forklift, support and drive the front wheel to rotate around the kingpin, so that the forklift is steered, and it is subject to variable impact loads when the forklift is running, so it is required to have high strength.

 

Lift Truck Steer Knuckle Should Be Inspected When Maintenance

1. Inspection of knuckle journal locking threads. No more than 2 teeth were injured. The lock nut can only be screwed in with a wrench. If it can be screwed in by hand, it means that the middle diameter of the thread is worn and loose, and the steering knuckle should be repaired or replaced.

 

2. Inspection of taper holes on knuckles. The wear of the taper hole matched with the knuckle arm and other rods should be checked with a plug gauge. The contact area should not be less than 70%, and the thrust end face of the taper neck matched with the taper hole should not be less than 2mm. Otherwise, replace the knuckle.

 

 

 

We are committed to creating reliable products and improving service quality for customers, and strive to become a leading manufacturer for Steering Knuckle Lh for Toyota 7f10/18 Forklift Truck in the industry. We will consolidate and enhance market share, strive to improve profitability, enhance overall competitiveness and strive to build into a professional enterprise with international competitiveness. We adhere to the concept of taking the green development path, open cooperation and win-win development.