Steering Knuckle Lh for Toyota 7f/8f20 Forklift Truck

Due to our rich experience and superb production technology, we firmly believe that our Electronic Flasher, tcm fd30, heli 490b forklift spare parts is very competitive in the market. Through continuous improvement, we always master the precise core technology, exquisite manufacturing technology and product quality control, and use our professional services to help customers create value. We have undertaken national, provincial and ministerial-level scientific research projects for many years, with fruitful technological achievements and outstanding strength. We are committed to creating an environment where learning and development are valued and where our employees can grow and develop independent and critical thinking on the job. We insist on winning with quality, pursuing excellent performance, strengthening technological innovation, actively exploring the market, fulfilling social responsibility and serving customers wholeheartedly.

Product Title: Forklift Steering Knuckle (Left)

Product Model: TLF-42504217 for Tailift CPCD30 Forklift

 

 

 

 

 

 

 

 

Item	Description
Product Name	Forklift Steering Knuckle (Left)
P/N	TLF-42504217
Applied Model	Tailift Forklift CPCD30
Net Weight (kg)	4.4
Gross Weight (kg)	4.7
Qty per Carton	1
Carton Size (cm)	14*10*20

 

 

 

Lift Truck Steer Knuckle

The function of lift truck steer knuckle is to transmit and bear the front load of the forklift, support and drive the front wheel to rotate around the kingpin, so that the forklift is steered, and it is subject to variable impact loads when the forklift is running, so it is required to have high strength.

 

Lift Truck Steer Knuckle Should Be Inspected When Maintenance

1. Inspection of knuckle journal locking threads. No more than 2 teeth were injured. The lock nut can only be screwed in with a wrench. If it can be screwed in by hand, it means that the middle diameter of the thread is worn and loose, and the steering knuckle should be repaired or replaced.

 

2. Inspection of taper holes on knuckles. The wear of the taper hole matched with the knuckle arm and other rods should be checked with a plug gauge. The contact area should not be less than 70%, and the thrust end face of the taper neck matched with the taper hole should not be less than 2mm. Otherwise, replace the knuckle.

 

 

 

Since we have scientific management mode, rigorous working attitude, solid technical strength and advanced manufacturing technology, we can promise that each of our Steering Knuckle Lh for Toyota 7f/8f20 Forklift Truck is of the highest quality. We will firmly grasp the new opportunities of global development and insist on mutual benefit and win-win development. We take ethics as an important criterion for measuring employees, so that we only put the people with both ability and political integrity in the important positions.