Precision Linear Servo Motor Electric Cylinder for Car Truck Lifting Equipment

Our strength and advanced technology are perfectly reflected in each and every Forklift Spray Painting, Lift Switch, heli cpcd30 forklift we produce. We require all employees to participate in environmental protection actions and continuously improve to protect the environment. We increase our efforts to introduce talents and strive to build the enterprise into a modern enterprise with strong competitiveness and efficient utilization of resources. In addition to our own production and R & D advantages, our company also attaches great importance to the construction of sales network and different market positioning directions to meet the requirements of customers in an all-round way. We are committed to providing high value-added, high-return quality services for the benefit of people around the world.

Product Title: Forklift Hydraulic Tilt Cylinder

Product Model: B382072

 

 

 

 

 

 

Item	Description
Product Name	Forklift Hydraulic Tilt Cylinder
P/N	YB382072
Applied Model	Tailift Forklift 5T
Net Weight (kg)	15
Gross Weight (kg)	17
Qty per Carton	1
Carton Size (cm)	60*15*15

 

 

 

Lift Truck Tilt Cylinder

The lift truck tilt cylinder is installed on the forklift upright mast. Lift truck tilt cylinder is mainly composed of the main parts such as the piston, cylinder body, piston rod, upper cover, lower cover, compression nut, and cover nut.

 

Inspection and Repair

1. After disassembling lift truck tilt cylinder, the forklift cylinder parts should be carefully cleaned and dried.

2. Check the coaxiality of the forklift piston and forklift piston rod. Mount the forklift piston rod on the V-shaped frame and check with a dial indicator. If the accuracy of the forklift piston does not meet the accuracy requirements and is out of tolerance, it should be replaced.

3. Check if the piston of the forklift is bent. Check with a V-shaped frame and dial indicator. When it is bent, it should be corrected and repaired.

4. When the surface of the forklift tilt cylinder is seriously worn or scratched, it can be repaired by honing.

5. If the inner hole of the forklift guide tube is seriously worn or scratched, it should be replaced.

5. If the leather cup and forklift sealing ring are worn and broken, they should be replaced. When an O-ring seal is used on a forklift piston, it generally loses its original shape after several years of use and should be replaced.

7. The clearance between the repaired tilt cylinder inner surface and the forklift piston should be 0.04-0.13mm, but the clearance should not be greater than 0.25mm.

8. The gap between the piston rod of the forklift and the guide sleeve is 0.04-0.15mm. If the gap is greater than 0.45mm, the guide sleeve should be replaced.

 

Specifications

 

Name	Unit	Parameter
Cylinder diameter (piston diameter)	mm	40~160
Rod diameter (piston rod diameter)	mm	20~120
Stroke	mm	50~2500
Pressure	MPa	16~25
Operating temperature	℃	-40~120
Piston rod coating NSS neutral salt spray test time	H	≥96

 

 

 

We absorb advanced technology at home and abroad, and combine practice to apply technology into our Precision Linear Servo Motor Electric Cylinder for Car Truck Lifting Equipment. We have strong technical force, strict quality system and considerate customer service, and we're looking forward to your understanding and cooperation! With the unremitting efforts of our company, the output of our company has been greatly improved, and the production technology has been developing steadily.