Nissan K21 K25 H15 H20 H25 Td27 Td42 Engine for Forklift

We provide our customers with excellent solutions with innovative technologies and Forklift Water Tank Cover, Forklift Cab Enclosure, Forklift Transmission Shaft. In recent years, the combination of customers' expectations and our company's business expectations is more and more close, and our company's scale is constantly developing. Our reputation comes from the rock-like quality of our products! In terms of material selection, we strictly control the quality; in the finished product inspection link, we strictly carry out the withstand voltage test in accordance with the relevant national standards, so that unqualified products are not delivered for use.

Product Title: Cylinder Head Gasket

Product Model: C240F5-11141-069-0

 

 

 

 

 

 

Item	Description
Product Name	Cylinder Head Gasket
P/N	C240F5-11141-069-0
Applied Model	C240PKG / J
Net Weight (kg)	0.50
Gross Weight (kg)	1.50
Qty per Carton	1
Carton Size (kg)	47*21*03

 

 

 

 

Forklift Diesel Engine Cylinder Head Gasket Product Description:

It is applied to the C240 Isuzu diesel engine and adopts metal steel surface technology, and the cutting surface is neat and flawless. Forklift engine cylinder head gasket has the advantages of heat resistance, corrosion resistance, sufficient strength, certain elasticity, and thermal conductivity.

 

Forklift Engine Cylinder Gasket Disassembly and Maintenance Caution:

1. Removing the cylinder head bolts and replacing the cylinder pads must be performed after the engine has completely cooled down to prevent the cylinder head from flexing and deforming.

2. Check the surface of the cylinder head gasket for depressions, protrusions, damage, etc .; check whether the flatness of the cylinder head and cylinder body meets the requirements, and then clean the cylinder gasket, cylinder head, and cylinder body, and blow dry with high-pressure air to avoid the influence of dirt seal.

3. The selected cylinder gasket must be a genuine quality accessory that meets the requirements (specifications and models). Pay attention to the up and down orientation marks to prevent reverse installation and avoid human failure. Please contact the leading forklift parts for original accessories.

4. Tighten the cylinder head bolts in accordance with the technical specifications. Since the center is symmetrically extended to the two ends and crosswise, it is tightened to the specified torque in 2 to 4 times; it is more reliable to fasten it once in the hot car state.

5. Should engine cylinder head bolts not be removed by rusting, you do not pry hard with iron to avoid damaging the cylinder head. You can inject kerosene into the screw holes of the cylinder head for a while to remove it.

6. If the cylinder head is improperly stored, disassembled, or disassembled, and the cylinder gasket is damaged or deformed, the cleaning during installation will result in poor work and tight sealing, which may cause human failure and must be taken seriously.

 

 

Because of our manufacturing skills and technical expertise in Nissan K21 K25 H15 H20 H25 Td27 Td42 Engine for Forklift industry, we are able to make strong market presence worldwide. Our quality products are exported not only in China but worldwide. Our company will do well in export and increase the development of domestic market. We will welcome new and old customers at home and abroad to negotiate with excellent quality, high-quality service and low price. We are in continuous service to our growing local and international clients.