Gasoline &LPG Dual Fuel Forklift 1.5 Ton to 7 Ton, Triple Mast, USA GM Engine

We take full consideration of the actual needs of our customers, and make well-structured and high-quality Clutch Pressure Plate, forklift side shift cylinder, rhino heli forklift. After years of innovation and development, we have created our own brand, and our business has spread to many countries and regions in the world. We insist that development is for the staff, development depends on the staff, and the fruits of development are shared by the staff. In the new historical period, we will, as always, adhere to the fundamental tenet of keeping promise and serving customers.

Product Title: Cylinder Head Gasket

Product Model: C240F5-11141-069-0

 

 

 

 

 

 

Item	Description
Product Name	Cylinder Head Gasket
P/N	C240F5-11141-069-0
Applied Model	C240PKG / J
Net Weight (kg)	0.50
Gross Weight (kg)	1.50
Qty per Carton	1
Carton Size (kg)	47*21*03

 

 

 

 

Forklift Diesel Engine Cylinder Head Gasket Product Description:

It is applied to the C240 Isuzu diesel engine and adopts metal steel surface technology, and the cutting surface is neat and flawless. Forklift engine cylinder head gasket has the advantages of heat resistance, corrosion resistance, sufficient strength, certain elasticity, and thermal conductivity.

 

Forklift Engine Cylinder Gasket Disassembly and Maintenance Caution:

1. Removing the cylinder head bolts and replacing the cylinder pads must be performed after the engine has completely cooled down to prevent the cylinder head from flexing and deforming.

2. Check the surface of the cylinder head gasket for depressions, protrusions, damage, etc .; check whether the flatness of the cylinder head and cylinder body meets the requirements, and then clean the cylinder gasket, cylinder head, and cylinder body, and blow dry with high-pressure air to avoid the influence of dirt seal.

3. The selected cylinder gasket must be a genuine quality accessory that meets the requirements (specifications and models). Pay attention to the up and down orientation marks to prevent reverse installation and avoid human failure. Please contact the leading forklift parts for original accessories.

4. Tighten the cylinder head bolts in accordance with the technical specifications. Since the center is symmetrically extended to the two ends and crosswise, it is tightened to the specified torque in 2 to 4 times; it is more reliable to fasten it once in the hot car state.

5. Should engine cylinder head bolts not be removed by rusting, you do not pry hard with iron to avoid damaging the cylinder head. You can inject kerosene into the screw holes of the cylinder head for a while to remove it.

6. If the cylinder head is improperly stored, disassembled, or disassembled, and the cylinder gasket is damaged or deformed, the cleaning during installation will result in poor work and tight sealing, which may cause human failure and must be taken seriously.

 

 

After years of hard work, our sales network is quite sound and our Gasoline &LPG Dual Fuel Forklift 1.5 Ton to 7 Ton, Triple Mast, USA GM Engine sells well in domestic and international markets. By providing high-quality products, our company has been recognized by consumers and established emotional ties. We expect to be respected corporate citizens, so we actively fulfill our social responsibilities and obligations.