Forklift Driving Axle Case

Product Title: Forklift Front Axle Housing

Product Model: A22J3-02021 for HELI JAC Forklift 3T

Forklift Driving Axle Case Inspection and Repair

Inspecting the forklift driving axle case regularly is strongly recommended when you do the overhaul for your forklift lift, here is checking requirements:

● The misalignment of the inner and outer bearing brackets at both ends of the forklift driving axle housing should not exceed 0.01mm; the vertical error of the bearing seat neck and its thrust end face not exceed 0.05mm;

● The bearing seat neck should be perpendicular to the edge plane of the brake base plate, and the vertical error should be no more than 0.1mm.

● Screw hole thread damage should not be more than 2 deductions, more than when can be repaired or welded repair.

● When the oil seal wear exceeds 0.15mm, it can be repaired.

● When the shaft journal wear of the axle shaft sleeve rolling bearing is greater than 0.04mm, it can be chrome plated or surfacing repair.

● When axle bushings have cracks and defects of any nature, they should be replaced.

● The wear of the inner and outer end bracket holes of the forklift driving axle case driver shaft sleeve shall not be greater than 0.06mm, otherwise, the driving axle sleeve journal can be chrome plated or expanded to a repair size.

● When the drive axle housing is broken, it should be replaced.

● The wear of the inner and outer end bracket holes of the forklift driving axle housing half shaft sleeve shall not be greater than 0.06mm, otherwise, the axle sleeve journal can be chrome plated or expanded to a repair size.

● When the drive axle housing is cracked, it should be replaced.

Hot Tags: forklift driving axle case, China, manufacturers, suppliers, factory, HELI forklift, CHL forklift, JAC forklift, Hangcha forklift, forklift HELI 3 ton, HELI forklift for sale, Forklift Driving Axle Housing, Heli forklift filters, Forklift Driving Axle Case